70412 tkim/63004 tsim tb-00000279/31201 kt/41000 ts (koto) ta-1721 no.6078-1/7 http://onsemi.com semiconductor components industries, llc, 2013 september, 2013 cph3109/cph3209 bipolar transistor (?) 30v, (?) 3a, low v ce ( sat ) , ( pnp ) npn single cph3 stresses exceeding maximum ratings may damage the device. maximum ratings are stress ratings only. functional operation above t he recommended operating conditions is not implied. extended exposure to stresses above the recommended operating conditions may affect device reliabili ty. applications ? relay drivers, lamp drivers, motor drivers, strobes features ? adoption of mbit processes ? large current capacity ? low collector-to-emitter saturation voltage ? high-speed switching ? ultrasmall package facilitates miniaturization in end products (mounting height : 0.9mm) ? high allowable power dissipation speci cations ( ): cph3109 absolute maximum ratings at ta=25c parameter symbol conditions ratings unit collector-to-base voltage v cbo (--30)40 v collector-to-emitter voltage v ceo (--)30 v emitter-to-base voltage v ebo (--)5 v collector current i c (--)3 a collector current (pulse) i cp (--)5 a base current i b (--)600 ma collector dissipation p c when mounted on ceramic substrate (600mm 2 0.8mm) 0.9 w junction temperature tj 150 c storage temperature tstg --55 to +150 c package dimensions unit : mm (typ) 7015a-003 ordering number : en6078c product & package information ? package : cph3 ? jeita, jedec : sc-59, to-236, sot-23 ? minimum packing quantity : 3,000 pcs./reel packing type: tl marking electrical connection tl 1 : base 2 : emitter 3 : collecto r cph3 2.9 0.05 0.4 2.8 1.6 0.2 0.6 0.6 0.9 0.2 0.15 2 1 3 0.95 3 2 1 3 2 1 cph3209 cph3109 aj lot no. cj lot no. cph3209 cph3109 CPH3109-TL-E cph3209-tl-e
cph3109 / cph3209 no.6078-2/7 electrical characteristics at ta=25c parameter symbol conditions ratings unit min typ max collector cutoff current i cbo v cb =(--)30v, i e =0a (--)0.1 a emitter cutoff current i ebo v eb =(--)4v, i c =0a (--)0.1 a dc current gain h fe v ce =(--)2v, i c =(--)500ma 200 560 gain-bandwidth product f t v ce =(--)10v, i c =(--)500ma (380)450 mhz output capacitance cob v cb =(--)10v, f=1mhz (25)20 pf collector-to-emitter saturation voltage v ce (sat)1 i c =(--)1.5a, i b =(--)30ma (--155)120 (--230)180 mv v ce (sat)2 i c =(--)1.5a, i b =(--)75ma (--)105 (--)155 mv base-to-emitter saturation voltage v be (sat) i c =(--)1.5a, i b =(--)30ma (--)0.83 (--)1.2 v collector-to-base breakdown voltage v (br)cbo i c =(--)10 a, i e =0a (--30)40 v collector-to-emitter breakdown voltage v (br)ceo i c =(--)1ma, r be = (--)30 v emitter-to-base breakdown voltage v (br)ebo i e =(--)10 a, i c =0a (--)5 v turn-on time t on see speci ed test circuit. (50)30 ns storage time t stg (270)300 ns fall time t f (25)15 ns switching time test circuit ordering information device package shipping memo CPH3109-TL-E cph3 3,000pcs./reel pb free cph3209-tl-e cph3 3,000pcs./reel pb free --0.4 --0.8 --1.2 --1.6 --2.0 0 i c -- v ce 0 --200 --400 --600 --800 --1000 200 400 600 800 1000 collector-to-emitter voltage, v ce -- mv collector current, i c -- a 2.0 0 i c -- v ce 0 collector-to-emitter voltage, v ce -- mv collector current, i c -- a 1.6 1.2 0.8 0.4 it08069 it08070 i b =0 cph3109 --50ma --40ma --30ma --20ma --10ma --8ma --6ma --4ma --2ma i b =0 cph3209 50ma 40ma 30ma 20ma 10ma 8ma 6ma 4ma 2ma + + 50 input outpu t v r r b 24 v cc = --12v 100 f 470 f v be =5v pw=20 s i b1 i b2 dc 1% --20i b1 =20i b2 = i c = --500ma cph3109 + + 50 input outpu t v r r b 24 v cc =12v 100 f 470 f v be = --5v pw=20 s i b1 i b2 dc 1% 20i b1 = --20i b2 = i c =500ma cph3209
cph3109 / cph3209 no.6078-3/7 10 100 5 7 3 2 2 23 57 23 57 10 1000 100 3 2 1000 5 7 100 10 3 2 5 7 3 2 collector current, i c -- a h fe -- i c dc current gain, h fe 1000 7 5 3 2 10 23 57 --0.01 --1.0 --10 --0.1 23 5 5 77 23 100 7 5 3 2 collector current, i c -- ma f t -- i c gain-bandwidth product, f t -- mhz 23 57 23 57 --10 --1000 --100 3 2 1000 5 7 100 10 3 2 5 7 3 2 collector current, i c -- a h fe -- i c dc current gain, h fe 1000 7 5 3 2 10 23 57 0.01 1.0 10 0.1 23 3 55 77 2 100 7 5 3 2 collector current, i c -- ma f t -- i c gain-bandwidth product, f t -- mhz it08073 it08075 it08074 it08076 collector-to-base voltage, v cb -- v cob -- v cb output capacitance, cob -- pf 23 57 --1.0 --10 25 3 23 57 1.0 10 23 5 100 5 7 10 3 2 2 collector-to-base voltage, v cb -- v cob -- v cb output capacitance, cob -- pf it08077 it08078 --4.0 --2.0 --2.5 --3.0 --3.5 --1.5 --1.0 --0.5 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 0 base-to-emitter voltage, v be -- v i c -- v be collector current, i c -- a 0 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 base-to-emitter voltage, v be -- v i c -- v be collector current, i c -- a 0 0.2 0.4 0.6 1.2 0.8 1.0 it08071 it08072 cph3109 v ce = --2v ta=75 c cph3209 v ce =2v --25 c 25 c ta=75 c cph3109 v ce = --2v cph3209 v ce =2v ta=75 c --25 c 25 c cph3109 v ce = --10v cph3209 v ce =10v cph3109 f=1mhz cph3209 f=1mhz --25 c 25 c --25 c 25 c ta=75 c
cph3109 / cph3209 no.6078-4/7 23 57 --0.01 --1.0 --10 --0.1 23 57 3 57 2 --1.0 --10 7 5 3 2 7 5 3 2 --0.1 7 5 3 2 --0.01 23 57 0.01 1.0 10 0.1 23 57 2 57 3 10 0.1 1.0 7 5 3 2 7 5 3 2 7 5 3 2 0.01 collector current, i c -- a v ce (sat) -- i c collector current, i c -- a v be (sat) -- i c 3 2 0.1 23 57 0.01 1.0 10 0.1 23 5 5 77 23 1.0 10 7 7 5 5 3 2 collector current, i c -- a v ce (sat) -- i c collector current, i c -- a v be (sat) -- i c 3 2 --0.1 23 57 --0.01 --1.0 --10 --0.1 23 57 23 57 23 57 0.1 10 1.0 23 3 57 2 5 --1.0 --10 7 7 5 5 3 2 it08081 it08083 it08082 it08084 ambient temperature, ta -- c p c -- ta collector dissipation, p c -- w 1.0 0 0.2 0.4 0.6 0.8 0.9 0 20 40 60 80 100 120 140 160 collector-to-emitter voltage, v ce -- v a s o collector current, i c -- a 2 10 2 3 5 7 1.0 2 3 5 7 0.1 3 5 7 0.01 it08085 it08086 23 57 0.01 1.0 10 0.1 23 57 2 57 3 1.0 7 7 5 5 3 3 2 2 0.01 0.1 7 5 3 2 0.001 collector current, i c -- a v ce (sat) -- i c collector current, i c -- a v ce (sat) -- i c 23 57 --0.01 --1.0 --10 --0.1 2 3 57 57 23 --1.0 7 5 3 2 7 5 3 2 --0.01 --0.1 --0.001 7 5 3 2 it08079 it08080 cph3109/cph3209 cph3109 i c / i b =20 ta=75 c 25 c --25 c cph3209 i c / i b =20 ta=75 c --25 c 25 c cph3109 i c / i b =50 ta=75 c 25 c --25 c ta=75 c --25 c 25 c cph3209 i c / i b =50 ta= --25 c 75 c 25 c cph3109 i c / i b =50 cph3209 i c / i b =50 ta= --25 c 75 c 25 c i c =3a i cp =5a ta=25 c single pulse mounted on a ceramic board(600mm 2 0.8mm) for pnp, minus sign is omitted. cph3109/cph3209 100 s 1ms 10ms 100ms dc operation collector-to-emitter saturation voltage, v ce (sat) -- v collector-to-emitter saturation voltage, v ce (sat) -- v collector-to-emitter saturation voltage, v ce (sat) -- v collector-to-emitter saturation voltage, v ce (sat) -- v base-to-emitter saturation voltage, v be (sat) -- v base-to-emitter saturation voltage, v be (sat) -- v 500 s mounted on a ceramic board(600mm 2 0.8mm)
cph3109 / cph3209 no.6078-5/7 embossed taping speci cation CPH3109-TL-E, cph3209-tl-e
cph3109 / cph3209 no.6078-6/7 outline drawing land pattern example CPH3109-TL-E, cph3209-tl-e mass (g) unit 0.013 * for reference mm unit: mm 0.6 2.4 0.95 0.95 1.4
cph3109 / cph3209 ps no.6078-7/7 on semiconductor and the on logo are registered trademarks of semiconductor components industries, llc (scillc). scillc owns th e rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. a listing of scillc?s product/patent covera ge may be accessed at www.onsemi.com/site/pdf/patent-marking.pdf. scillc reserves the right to make changes without further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does scillc ass ume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation sp ecial, consequential or incidental damages. ?typical? parameters which may be provided in scillc data sheets and/or specifications can and do vary in different ap plications and actual performance may vary over time. all operating parameters, including ?typicals? must be validated for each customer application by customer?s technical experts. scillc does not convey any license under its patent rights nor the rights of others. scillc products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life , or for any other application in which the failure of the scillc product could create a situation where personal injury or death may occur. should buyer purchas e or use scillc products for any such unintended or unauthorized application, buyer shall indemnify and hold scillc and its officers, employees, subsidiarie s, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that scillc was negligent regarding the d esign or manufacture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws a nd is not for resale in any manner.
|
